Tcp/Ip; Router Settings; Dhcp Server Enable - AT&T MiFi 2372 User Manual

TCP/IP

The TCP/IP page allows you to view the IP address and the MAC address for your MiFi device.
➤
Choose Router > TCP/IP from the menu bar.
The TCP/IP page opens.
This page gives you the following status information about your device:
IP Address — The address that identifies the MiFi device on the network
•
Subnet Mask — The standard address for the MiFi device subnet.
•
MAC Address — The physical address or hardware address of your MiFi device.
•
DHCP Address Range — The range of IP addresses assigned by the MiFi DHCP server.
•

Router Settings

The Router Settings page allows you to enable DHCP and allow VPN passthrough.
➤
Choose Router > Settings from the menu bar.
The Router Settings page opens.

DHCP Server enable

The DHCP Server allows the device to automatically assign a local IP address to a new device joining
your network (such as a wireless printer or another computer). Without the DHCP Server enabled,
you have to assign static IP addresses to all devices on your network.
➤
Select or deselect the check box to enable or disable the DHCP server and then click Apply.
52