Zanussi ZWH 6160 P User Manual page 7

• Remove the power supply cable and the draining and
inlet hose from the hose holders (C) on the rear of
the appliance.
• Unscrew the three bolts (A) and remove the hose
holders (C).
• Slide out the relevant plastic spacers (B).
• Open the door and re-
move the plastic hose
guide, the bag contain-
ing the instruction
booklet and the plastic
plug caps from the
drum.
• Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
Warning! Do not re-
move the drain hose
from the rear support. Re-
move this hose only if it is
necessary to drain the wa-
ter. Refer to "Frost precau-
tion" and "What to do if".
7