Zanussi ZWH 6160 P User Manual page 15

Extra Rinse
Delay Start
5
Indicator pilot lights
6.1
Hoofdwas
Lavage
6.2
Extra spoelen
Rinçage plus
Einde
6.3
Fin
This appliance is designed for saving water. However, for people with very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water.
Press simultaneously the buttons 3 and 4 for some seconds: the pilot light
6.2 comes on. This function stays permanently on. To remove it press the
same buttons again until the pilot light 6.2 goes off.
The start of the programme can be delayed by 9, 6 or 3 hours by means of
this button. The relevant light illuminates.
You must select this option after you have set the programme and before
you start the programme.
Select a delayed start:
• select the programme and the required options;
• select the delay start by pressing the button 5;
• press the button 7:
– the appliance starts its hourly countdown.
– The programme will start after the selected delay has expired.
Cancelling the delayed start after having started the programme:
• set the appliance to PAUSE by pressing the button 7;
• press the button 5 once, the light relevant to the selected delay goes off;
• press the button 7 again to start the programme.
The DELAY START cannot be selected with the drain programme.
Important! The selected delay can be changed only after selecting the wash-
ing programme again. The door will be locked throughout the delay time. If
you need to open the door, you must set the appliance to PAUSE (by press-
ing the button 7) and then wait a few minutes. After you have closed the
door, press the button 7 again.
• When you start the programme by pressing the button 7, the washing
phase pilot light (6.1) illuminates. This means that the appliance is oper-
ating.
• The additional rinses pilot light (6.2) illuminates when the appliance per-
forms an extra rinse.
• When the programme has finished the end cycle pilot light (6.3) comes
on.
15