Table of Contents
Advertisement
Reinstall Synology DiskStation
If you want to reinstall your Synology DiskStation without losing its data, you can use the
back panel.
To reinstall Synology DiskStation:
1 Press and hold the
RESET
2 Within the next 10 seconds, press and hold
emits a beep sound.
3 Run Synology Assistant and follow the installation instructions in the Quick Installation Guide that came with
your installation CD to set up the Synology DiskStation.
Important:
The data saved on the Synology DiskStation will not be erased during the reinstallation. However, for
security reason, we strongly recommend that you back up the data first.
Enable SNMP Service
Go to
Main Menu
>
Control Panel
Synology DiskStation network flow with the network management software.
Currently,
SNMPv1
and
To enable SNMP service:
1 Tick
Enable SNMP service
2 Enter the optional information to help you identify your Synology DiskStation: Name, Location, and Email.
3 Click OK.
To disable the SNMP service:
Uncheck
Enable SNMP
215 Chapter 16: Perform Advanced Management Tasks
button for about 4 seconds until the Synology DiskStation emits a beep sound.
RESET
>
SNMP
to enable SNMP service, which allows users to monitor
SNMPv2c
protocols are supported.
and enter a
Community
service, and click OK.
Synology DiskStation User's Guide
button for about 4 seconds until the Synology DiskStation
name.
Based on DSM 3.1
RESET
button on the
Hide quick links:
Advertisement
Table of Contents
