Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Name
1)
LED Indicators
2)
Power Button
3)
Fan
4)
eSATA Port
5)
USB3.0 Ports
6)
RESET Button
7)
LAN Port
8)
Power Port
---------
1
Synology Expansion Unit is supported on certain DiskStations only.
4 Chapter 1: Before You Start
Location
The LED indicator is used to display the status of the internal disk and the
system. For more information, see "Appendix B: LED Indication Table" on Page
Front Panel
11.
The power button is used to turn Synology DiskStation on or off.
Front Panel
To turn off Synology DiskStation, press the power button and hold it until you
hear a beep sound and the Power LED starts blinking.
The fan is built to exhaust waste heat out of Synology DiskStation. If the fan is
Back Panel
malfunctioning, the system will beep every few seconds.
The eSATA port is used to connect external SATA disk or Synology Expansion
Back Panel
1
Unit
to Synology DiskStation.
The Synology DiskStation offers USB3.0 ports for adding additional external
Back Panel
hard drives, USB printers, or other USB devices.
1. To restore IP, DNS, passwords for the admin account to default value.
Back Panel
2. To reinstall the Synology DiskStation.
The LAN port is where you connect RJ-45 cable to Synology DiskStation.
Back Panel
The power port is where you connect the AC power adapter to
Back Panel
Synology DiskStation.
Description
Advertisement
Table of Contents
