Synology Diskstation At A Glance - Synology DiskStation DS413 Quick Installation Manual

Synology DiskStation at a Glance

No. Article Name
1)
LED Indicators
2) USB 2.0 Port
3)
Power Button
4) Fan
5)
LAN Port
6)
RESET Button
7)
USB 3.0 Ports
8)
Power Port
9)
eSATA Port
---------
1
Synology Expansion Unit is supported on certain DiskStations only.
4 Chapter 1: Before You Start
Location
The LED indicators are used to display the status of the internal disk and the
system. For more information, see "Appendix B: LED Indication Table" on
Front Panel
Page 16.
The Synology DiskStation offers a USB port for adding additional external hard
Front Panel
drives, USB printers, or other USB devices.
The power button is used to turn Synology DiskStation on or off.
Front Panel
To turn off Synology DiskStation, press the power button and hold it until you
hear a beep sound and the Power LED starts blinking.
The fan is built to exhaust waste heat out of Synology DiskStation. If the fan is
Back Panel
malfunctioning, the system will play beep sounds.
The LAN port is where you connect RJ-45 cable to Synology DiskStation.
Back Panel
1. To restore IP, DNS, passwords for the admin account to default value.
Back Panel
2. To reinstall the Synology DiskStation.
The Synology DiskStation offers USB ports for adding additional external hard
Back Panel
drives, USB printers, or other USB devices.
The power port is where you connect the AC adapter to Synology DiskStation.
Back Panel
The eSATA port is used to connect external SATA disk or Synology Expansion
Back Panel
1
Unit to Synology DiskStation.
Description