Synology DiskStation DS111 User Manual page 178

c Change the port number if the camera is using another port.
d Select the camera brand from the drop-down menu.
e Select the camera model from the drop-down menu.
f Select the video channel from the drop-down menu if the camera device is a video server.
g Select the video format from the drop-down menu.
h Select the streaming type from the drop-down menu.
i Enter the username and password of the camera's administrator account.
j Click Test Camera
4 If you selected Quick
a Select the Image
b Select the live view source from either Surveillance Station or directly from camera. Choosing live view
source from the camera will mitigate the server loading and minimize the possible time delay. However, you
will have to configure the camera's port forwarding to live view via Internet.
5 Click Next and edit the
a Choose either Motion detection by the camera
only). Choosing Motion detection from the camera
time delay. Choosing
detection capability to camera models without this function built-in.
b Tick the checkbox of
recording while in continuous recording mode
different colors on the event timeline.
c Select the time length of each saved video file under continuous recording mode.
d Select Pre-recording time
e Select Enable audio when recording
6 Click Next and edit the following
a Enter a name for the event archive folder that will be used to save the recorded videos.
b Enter the file name prefix that will appear in front of each file name.
c Tick Keep the files within (days)
will be saved and deleted according to the settings.
d Click Estimate Required Space
7 Click Next and edit the following
a To set a schedule plan for automatic recording, click the
Recording, Alarm
select an area on the grid.
b To select the entire day or hour in each day, click the day grid or the hour grid.
8 Click Finish to complete the setup.
Note:
1 If your camera model is not listed, you can select a similar model or choose
image source path. The source path must be set correctly for the camera to obtain images. Please consult the
camera's manufacturer for the camera source path.
2 In MPEG4 format, Surveillance Station supports audio streaming in both Live View and video recording. The audio
support is only available when the IP camera is equipped with audio function.
3 Surveillance Station supports two streaming types, HTTP and RTSP. The actual supported streaming type
depends on the camera capability.
4 The frame rate should be set appropriately for the best recording performance.
5 Only UPnP compatible cameras will be found when
178 Chapter 14: Safeguard Your Environment with Surveillance Station
to see if the camera can be correctly connected.
Setup, click Finish to complete setup. Otherwise, click
quality, Resolution, and Frame rate
Recording settings:
Motion detection by Surveillance Station (MJPEG only)
Enable motion detection while in continuous recording mode
and the Post-recording time
and choose
Storage Settings:
or Limit the archive folder up to (GB)
to evaluate the space usage.
Schedule settings:
Recording(A), Motion Detection and Alarm Recording
Synology DiskStation User's Guide
1
2
3
Next
4
for recording image and live view image.
or Motion detection by Surveillance Station (MJPEG
will mitigate server loading and minimize the possible
at your preference. Different events will be displayed in
under event recording mode.
Audio format if your camera supports the function.
and specify the value. Archives
Continuous Recording,
User Define
Search Camera is clicked.
Based on DSM 3.1
to edit the Video settings:
will provide Motion
or Enable alarm
Motion Detection
buttons, and then click or
and enter the camera's