Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Article Name
1
Status Indicator
2
LAN Indicator
3
Disk Indicator
4
Power Button
5
Fan
6
LAN Port
USB 2.0 Port
7
USB 3.0 Port
8
RESET Button
Kensington
9
Security Slot
10
Power Port
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "Appendix B: LED
Indicator Table".
Displays the status of the network connection. For more information, see
"Appendix B: LED Indicator Table".
Front Panel
Displays the status of the installed drives. For more information, see "Appendix B:
LED Indicator Table".
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep sound and
the Power LED starts blinking.
Disposes of excess heat and cools the system. If the fan malfunctions, the
DiskStation will emit a beeping sound.
Connect a network cable here.
Connect external hard drives, USB printers, or other USB devices to the
DiskStation here. The USB 3.0 port is colored blue.
Back Panel
1. Press and hold until you hear a beep sound to restore the default IP address,
DNS server, and password for the admin account.
2. Press and hold until you hear a beep sound, then press and hold again until
you hear three beep sounds to return the DiskStation to "Not Installed" status
so that DiskStation Manager (DSM) can be reinstalled.
Attach a Kensington security lock here.
Connect the AC power adapter here.
Description
Advertisement
Table of Contents
