Admin Functions - Avaya 9040 User Manual

Ip office
Hide thumbs Also See for 9040:
Table of Contents

Advertisement

DSS Key Functions

Admin Functions

4400, 4600, 6400 & TransTalk MDW 9040 Telephones
IP Office
The following can be programmed against a DSS key via the Admin
function (see "Programming Functions Against DSS Keys" on page 26).
Dir
Access the telephone system directory (see "Using the Directory" on page
7). This function does not require any data entered when programmed.
Drop
Clears the current connected call. Temporarily pauses the ringing of an
incoming call. This function does not require any data entered when
programmed.
Hfans
Sets the phone to auto-answer internal calls after a single ring. This
function does not require any data entered when programmed. When on
the appropriate DSS key lamp is lit.
Timer
Starts a timer running on the phone's display. This function does not require
any data entered when programmed. The timer is reset whenever a new
call is made or answered. When timer mode is selected the appropriate
DSS key lamp is lit.
AutoCB
Sets a callback when free on a called busy extension and a callback when
next used on a called but unanswered extension. This function does not
require any data entered when programmed. When a callback is set the
appropriate DSS key lamp is lit. The DSS key can be pressed again to
cancel the callback.
Prog
Program and relabel the default softkey functions. Program a telephone
number to dial against a DSS key (see "Storing Abbreviated Dialing Under
a DSS Key" on page 24).
CFrwd
Switch call forwarding on/off and set the forwarding number. This function
can be programmed with or without a target forwarding number.
If programmed with a forwarding number, pressing the appropriate DSS
key switches forwarding to that number on.
If programmed without a forwarding number, pressing the appropriate DSS
key prompts the user to set a forwarding number and then switch call
forwarding to that number on.
In both cases, while call forwarding in on the appropriate DSS key lamp is
lit and pressing the DSS key again switches call forwarding off.
40DHB0002USAL - Issue 7 (2nd October 2003)
Page 27
Page 27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents