D13 Dvr/Hard Drive Status - Motorola DCT6400 Series Installation Manual

4-20 Diagnostics

d13 DVR/Hard Drive Status

This two-page diagnostic indicates the set-top DVR and hard-drive status.
DVR/Hard Drive Status Page:
DVR Status
Enabled:
Stream Indexer Ver:
Content Record Ver:
Encoder
Number
1
2
Drive
IDE0
The DVR/Hard Drive Status page fields are:
Field Description
Enabled Indicates whether the DVR is enabled, based on the set-top configuration
(connect/disconnect state) and resource availability (resource authorized; hard disk
installed and functional):
OSD
True
False
Stream Indexer Ver. Indicates the stream indexer version number, displayed without leading zeros. For
example, version 0000000065 is displayed as "65."
Content Record Ver. Indicates the content record version number, displayed without leading zeros.
Encoder Information about the analog encoder for the IEEE 1394 output and recording analog
programs.
Number Indicates the encoder number — 1 or 2.
Type
Indicates the encoder type — Not Inst(alled), MPEG2, Other, or Unknown.
Quality Indicates the encoder quality setting (video bit rate) for analog services only, which
may change at any time through software:
DCT6400 Series Installation Manual
DVR/Hard Drive Status
True
131
2
Type
MPEG2
MPEG2
Record Capacity Remaining
xxxxxxxxxxxxxxxxxxxx
LED Description
En DVR enabled
Un DVR disabled
LOW1 — 1 Mbps
LOW2 — 2 Mbps
MEDIUM1 — 3 Mbps
MEDIUM2 — 4 Mbps
HIGH1 — 5 Mbps
HIGH2 — 6 Mbps
NOT AVAILABLE — the encoder is not enabled or configured
Quality
HIGH2
HIGH2
vvv Scroll Down vvv