Chapter 1 Introduction; Product Specifications - CHAINTECH 9EJL4 User Manual

1-1 Product Specifications

Processor
- Supports Intel® Celeron/Pentium 4 Socket 478 CPU with Hyper-Threading
Technology
- Supports Intel® Celeron / Pentium 4 system bus at 400/533/800MHz (FSB 800 is
conditionally supported. Please refer to Memory Compatibility Chart for details)
Chipset
- Intel® 845PE + ICH4 Chipset
- Supports Hyper-Threading Technology
Main Memory
- Supports two 184 pin DDR DIMMs up to 2GB
- Supports PC 2100/2700/3200 non –ECC DDR SDRAM modules
Expansion Slots
- One 1.5V AGP slot for 4X AGP
- Five 32-Bit PCI slots (v2.2 compatible).
6-channel audio subsystem via AC-link
- With external high quality CMedia 9739A 6-channel AC'97 Codec
- Complete software driver supports for Windows OS
Ultra DMA-66/100 PCI IDE Controller
- Supports two IDE ports up to 4 ATAPI devices
- Supports PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps and Multi
Word Mode 5 up to 100MBps
- Bus-Mastering software drivers for all common multi-tasking operating systems
Embedded USB 2.0 Host Controller
- Three EHCI USB 2.0 controllers support total 6 USB 2.0/1.1 ports
- Supports USB 2.0 high-speed device @480Mb/s transfer rates
- Optional USB adapter for additional USB 2.0/1.1 ports
On-board ITE 8702 Super I/O Controller
- Two UARTs support two serial ports
- One SPP/ECP/EPP parallel Port
- One floppy disk drive connector supports up to 2.88MB
Introduction
Chapter 1
Chapter 1
1