The Setup Wizard - D-Link DFL-200 Quick Installation Manual

The Setup Wizard

(continued)
Step 3 - PPTP
If you selected PPTP you will
need to specify both PPTP
tunnel parameters and Physical
interface parameters.
PPTP tunnel parameters:
Enter the Username, Password
and the PPTP Server IP address
provided by your ISP.
Physical interface parameters:
DHCP
If your Internet Service Provider is
using DHCP you should select the
DHCP radio button.
Static IP
If your Internet Service Provider
is using Static IP you should
select the Static IP radio button
and enter IP Address, choose
a Subnet Mask and enter the
Gateway IP address.
Click Next
8