Setting Up Your Monitor; Attaching The Tilt And Swivel Base - HP D2832A User Manual

Setting Up Your Monitor

Attaching the Tilt and Swivel Base

Your display has a tilt and swivel base. To fit and tilt the swivel base:
1 Turn the display on its side (never on the screen). Identify the front
of the base.
2 Locate the slots in the underside of the display.
3 Slide the base towards the front of the display until the locking tab
on the base clicks into place.
1
3
Where to Place the Monitor
Place your monitor on a flat sturdy surface.
Ensure the operating site is free from excessive heat, moisture, dust
and sources of electromagnetic fields. Sources of electromagnetic
fields include transformers, motors, and other monitors.
Avoid exposing the monitor to direct sunlight.
HP M500 15" Color Monitor User's Guide
2
Setting Up Your Monitor
English 5