Care And Cleaning - HP D2832A User Manual

Care and Cleaning

Do not place anything on top of the monitor. Doing so may block the
monitor vents and cause damage to the monitor due to overheating.
Do not let liquid get on or into the monitor.
To maximize screen life and prevent damage to the picture tube (such
as burned phosphor due to leaving the same image on the screen for a
long time), it is recommended that you:
Use the monitor power management system (on HP PCs) or a screen
•
saver program.
Avoid setting contrast and brightness to their maximum levels for
•
prolonged periods.
If you do not have a power management system or a screen saver
•
program, switch the monitor off or reduce the brightness and
contrast to minimum levels when the monitor is not in use.
Your monitor has an anti-glare, anti-static screen coating. To prevent
damage to the monitor screen's coating, use a regular household glass
cleaner when cleaning the screen. To clean the screen:
1 Switch the monitor off and remove the power plug (pull the plug, not
the cable).
2 Wet a soft cotton cloth with the cleaning solution and gently wipe the
screen. Do not spray cleaner onto the screen because the cleaner
may drip inside the monitor.
3 Dry with a clean, soft cotton cloth.
Do not use cleaning solutions containing fluoride, acids, or alkalis.
HP M500 15" Color Monitor User's Guide
Care and Cleaning
English 15