Operation Interface - Planet GRT-101 User Manual

PLANET Technology GRT-101 User's Manual

3.4 Operation Interface

For serial console and Telnet management, GRT-101 implements two
operational interfaces: command line interface (CLI) and menu driven interface.
The CLI mode provides users a simple interface, which is better for working
with script file. The menu driven interface is a user-friendly interface to general
operations. The command syntax for CLI is the same as that of the menu
driven interface. The only difference is that the menu driven interface shows
you all of available commands for you to select. You don't need to remember
the command syntax and save your time on typing the whole command line.
The following figure gives you an example of the menu driven interface. In the
menu, you scroll up/down by pressing key I / K, select one command by key L,
and go back to a higher level of menu by key J. For example, to show the
system information, just logon to GRT-101, move down the cursor by pressing
key K twice and select "show" command by key L, you shall see a submenu
and select "system" command in this submenu, then the system will show you
the general information.
In this chapter, all configuration procedures are explained by command line
examples with necessary parameters. When operating in the menu driven
interface, just select the corresponding command items from the menu
hierarchy to configure the same setting.
Note: GRT-101 invokes menu driven interface when first time logon with default user profile "admin". Both interfaces
- 20 -