SonicWALL TZ 170 Getting Started Manual page 16

6. LAN Settings - The LAN Settings screen configures your LAN interface.
SonicWALL LAN
IP Address
LAN Subnet Mask
Enable
Windows Networking
Support
By default, your SonicWALL TZ 170 Wireless is configured with a LAN network IP
address, 192.168.168.168, and subnet mask, 255.255.255.0, which will work well for
most installations. In most cases, leave the default LAN IP address and subnet mask
unchanged.
Note:
The LAN IP address is the address you will use to access the
SonicWALL TZ 170 Wireless management interface.
Click Next.
7. LAN DHCP Settings - The LAN DHCP Settings screen allows you to select whether
or not to use the DHCP server in the SonicWALL TZ 170 Wireless to automatically
distribute IP addressing information to computers and other network devices on your
LAN.
Enable DHCP Server
on LAN
LAN Address Range
Click Next.
Accept the default IP address or enter a new IP address of the
LAN interface. Record the address:
Accept the default, or enter a subnet mask for your LAN.
Leave this option checked if you plan to have more than one
Windows computer on your network. Windows Networking has
no effect on computers with other operating systems.
Leave this checkbox checked to use the DHCP server in the
SonicWALL TZ 170 Wireless security appliance.
Do not select this option if you already have a DHCP server on
your network, or if you want to require your network clients to
have static IP addresses.
If you enabled the DHCP Server, enter a range of IP addresses in
the same subnet as the LAN IP address, or leave the default
range unchanged. The default DHCP range will work for most
installations.
SonicWALL TZ 170 Wireless Getting Started Guide
.
Page 15