Connecting The Sonicwall Tz 170 Wireless - SonicWALL TZ 170 Getting Started Manual

3

Connecting the SonicWALL TZ 170 Wireless

Connecting the WAN Cable to the Internet
1. Connect one end of an Ethernet cable to your Internet connection, such as a DSL
modem or cable modem.
This cable may already be connected between your computer and your modem. If
so, disconnect it from your computer, and leave it connected to the Internet.
2. Connect the other end of the cable to the WAN port on the back of your
SonicWALL TZ 170 Wireless.
The WAN LED on the front panel lights up, indicating an active connection.
Connecting the LAN Cable to Your Management Station
1. Connect one end of an Ethernet cable to the computer you are using to manage the
SonicWALL TZ 170 Wireless.
2. Connect the other end of the cable to port #1 (or ports #2 - #5 if you are using a PoE
injector) on the back of your SonicWALL TZ 170 Wireless.
The port LED on the front panel lights up, indicating an active connection.
Page 8
Internet
DSL or Cable
Modem
LAN port #1
WAN
Management
Station