SonicWALL TZ 170 Getting Started Manual page 35

Security appliance
Hide thumbs Also See for TZ 170:
Table of Contents

Advertisement

SonicWALL TZ 170 Wireless Security Appliance Regulatory
Statement and Safety Instructions
Regulatory Model/Type
APL14-034
Note:
Detailed regulatory information can be found in the electronic file,
"SonicWALL_Products_Regulatory_Statement.pdf," located on the SonicWALL
Resource CD provided with the unit.
Power Supply Information Models APL14-034
If you need to order a power supply for your SonicWALL TZ 170 Wireless, contact
SonicWALL Technical Support at 408-752-7819 for a replacement.
This product should only be used with a UL listed power supply marked "Class 2" or
"LPS", with an output rated 5 VDC, minimum 2.4 A.
Considerations for Mounting the APL14-034
Consideration must be given to the connection of the equipment to the supply circuit
and the effect of overloading the circuits has minimal impact on overcurrent
protection and supply wiring. Appropriate consideration of equipment nameplate
ratings must be used when addressing this concern.
A power cord is included only with units shipped to North America.
Mount in a location away from direct sunlight and sources of heat. A maximum
ambient temperature of 104º F (40º C) is recommended.
Route cables away from power lines, fluorescent lighting fixtures, and sources of
noise such as radios, transmitters, and broadband amplifiers.
Ensure that no water or excessive moisture can enter the unit.
Allow unrestricted airflow around the unit and through the vents on the side of the
unit. A minimum of 1 inch (25.44mm) clearance is recommended.
North American Authorized Channels
SonicWALL declares that the APL14-034, when sold in US or Canada is limited to
CH1~CH11 by specified firmware controlled in the USA.
Page 34
Product Name
SonicWALL TZ 170 Wireless

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tz 170 wireless

Table of Contents