External Drives - HP Compaq t5135 Hardware Reference Manual

Hp compaq thin clients hardware reference guide
Hide thumbs Also See for Compaq t5135:
Table of Contents

Advertisement

2.
Insert and tighten the three screws.
Figure 2-7
To replace the access panel:
1.
Place the access panel on the side of the unit, offset about 1/2–inch toward the front of the unit (1).
2.
Slide the panel toward the rear of the unit until it locks into place (2).
3.
Replace the two screws that secure the access panel to the chassis (3).
Figure 2-8

External drives

Various external USB drives are available as options for the t5135/t5530. For more information about
these drives, visit http://www.hp.com/products/thinclientsoftware, or refer to the instructions that
accompany the option.
For more information about available options, visit the HP Web site at
configure2.cfm
14
Chapter 2 Hardware changes
Replacing the metal side cover
Replacing the side access panel
http://h30143.www3.hp.com/
ENWW

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq t5530

Table of Contents