using the DVR
SETTING THE DEVICE
You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control.
2. Use the left/right button (◄ ►) to select <Device>.
Device setting menu is selected.
3. Use the up/down buttons () to move to <Camera>,
and press [ENTER] button.
4. Select <Camera>.
Displays settings window for Video, Audio, CH Name,
SEQ-Dwell Time, Screen Setup, and Privacy Region.
5. Use direction buttons (◄ ►) to move to a desired
item, and set the value.
• Video
- <ON/OFF> : You can turn ON/OFF the selected
channel's camera.
- <Covert1> : Shows information other than the video of
the selected channel.
For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.
• Audio
- If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.
- If set to <OFF>, the channel's audio is off on the Live screen and not recorded.
The sound can be output for just a single channel.
38_ using the DVR
Device
Camera
Storage Device
Remote Device
POS Device
Monitor
Camera
Camera
PTZ
Video
CH
Audio
CH Name
1
ON
OFF
CAM 01
2
ON
OFF
CAM 02
3
ON
OFF
CAM 03
4
ON
OFF
CAM 04
5
ON
OFF
CAM 05
6
ON
OFF
CAM 06
7
ON
OFF
CAM 07
8
ON
OFF
CAM 08
Screen Setup
Privacy Region
OK
Cancel
Logout
Return
SEQ-Dwell Time
5 sec
5 sec
5 sec
5 sec
5 sec
5 sec
5 sec
5 sec
Previous/Next Page