Remote Control; Using The Numeric Buttons - Samsung RD-840/1640 User Manual

REMOTE CONTROL

Displays the search menu.
Changes the screen mode.
Displays the Exit pop up screen.
NUMBER [0~ + 10]
Used as the numeric input keys, or displays a single
Skip Backward (by unit time),
Step Backward, Step Forward,
Skip Forward (by unit time)
Goes to the system menu screen.
Up/Down/Left/Right(▲▼◄ ►)/ENTER
Moves the cursor up/down/left/right, and runs the
Freezes the screen temporarily.
Runs the digital zoom (x2) function.
Starts or ends the live recording.
Runs the View function in the PTZ mode.

Using the Numeric buttons

CHANNEL 1–9
CHANNEL 10
CHANNEL 11–16
Changing the Remote Control ID
1. Press the ID button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
2. Enter 2 digits of your selection in order, while pressing the system [ID] button.
3. When ID input is done, press the system [ID] button again to check the setting.
M 
If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.
Remote control's ID and DVR's ID should be matched for proper operation. Refer to "Remote Devices". (Page 42)
SEARCH
MODE
POWER
channel.
T/W
Zooms in or out.
MENU
Select Menu.
FREEZE
ZOOM
REC
VIEW
Press each button between 1 to 9.
Press the [+10] button first, then press the 0 button again within 3 seconds.
Press the [+10] button first, then press any number between 1 to 6 within 3 seconds.
BACKUP
Displays the Backup Menu.
DVR
Activates the DVR function.
ID
Sets the ID of the system.
Select 2 digits from 0 ~ 9 while pressing the ID Key.
Move Frame
While paused, moves to the previous/next frame.
FR, STOP, PLAY/PAUSE, FF
PTZ
Displays or ends PTZ.
SCROLL ,.
Moves the menu scroll.
RETURN
Returns to the previous screen.
AUDIO
Turns Audio on/off.
ALARM
Cancels the Alarm.
REC LOCK
Selects the recording lock function.
PRESET
Displays the Preset Setup.
English _11