Video And Audio - Insignia NS-24ED310NA15 User Manual

Insignia 24" LED TV/DVD Combo
8 Highlight Yes, then press ENTER.
If you have plugged in a USB flash drive with the
firmware update, the firmware update starts
automatically. Otherwise, a screen opens with
instructions about how to download the
update. Follow the instructions, then press
ENTER.
While your TV installs the firmware update, your
TV displays a status screen. Do not turn off
your TV until the update is complete.
9 When the update is complete, unplug the USB
flash drive, then press ENTER. Your TV turns off
then on to complete the update.
10 If the channel list has been deleted and the TV
Setup wizard open, go through the TV SETUP
wizard. For more information, see
TV for the first
Note
• If you see a message that says the
firmware file is incorrect, make sure
that you have downloaded the correct
file for your model.
• If you see a message that says the
update failed or the TV screen is blank
and the power LED is blinking red
then blue, turn off your TV, turn it back
on, then run the upgrade again.
"Turn on your
time" on page 35.
www.insigniaproducts.com

Video and audio

Problem Solution
Picture does not
• Change the aspect ratio. An
fill the screen.
There are black
bars around the
picture.
No picture (screen
• Press
is not lit) and no
sound.
• Make sure that the Audio Only
• Make sure that the video cables
• Adjust the contrast and
• Make sure that the power cord
• Make sure that the correct
• Try another channel. The station
• Make sure that the incoming
• Make sure that the antenna or
• Check the closed caption
increasing amount of digital TV
and movies are presented in
wide screen (16:9). See the
"Aspect Ratio" option in "Adjust
the TV picture" on page 49.
on the TV or the
remote control.
option is set to Off. See "Play TV
audio only" on page 53.
are connected securely to your
TV.
brightness. See "Adjust the TV
picture" on page 49.
is plugged in.
video input source is selected.
See "Select the video input
source" on page 37.
may be experiencing problems.
signal is compatible.
cable TV is connected correctly
and securely. See "Connect a
cable or satellite box" on
page 13 or "Connect an
antenna or cable TV (no box)"
on page 18.
settings. Some TEXT modes can
block the screen. See "Select
the analog closed captioning
mode" on page 62 or "Select
the digital closed captioning
mode" on page 62.
69