Table of Contents
Advertisement
Select a channel
• Press CH
or CH
channel on the memorized channel list.
• Press the number buttons to enter the channel
number you want, then wait for the channel to
change or press ENTER to immediately change
the channel.
• To select a digital sub-channel, press the number
buttons to select the main digital channel, press
(sub-channel), then press the number button
for the sub-channel. Wait for the channel to
change, or press ENTER to immediately change
the channel. For example, to tune to channel 5.1,
press 5,
(sub-channel), then 1.
Note
Button presses must be within three
seconds of each other.
• Press
(return) to go to the last viewed channel.
• Press FAVORITE to open the favorite channel list,
press
or
to highlight a channel, then press
ENTER. For information about setting up a
favorite channel list, see "Set up a favorite channel
list" on page 53.
Note
If a list has more than one page, press
to scroll through the pages.
Adjust the volume
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press MUTE to turn off the sound. Press MUTE
again to turn the sound back on.
View channel information
• Press INFO* to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal
type, audio information, resolution, current
time, signal strength, day of the week, date
and current program start and end times, if
provided by the broadcaster.
• Analog channel information—Displays
channel number, channel label (if present),
signal type, audio information, day of the
week, date, and resolution, if provided by the
broadcaster.
40
to go to the next or previous
or
www.insigniaproducts.com
NS-32D311MX15 Insignia 32" LED TV
Use an MHL-enabled device
You can connect your MHL-enabled device, such as
a cell phone, and view your device's screen on your
TV.
Note
You must use the purple HDMI1(MHL)
jack to connect an MHL-enabled device.
Connect and use
1 Connect an MHL-enabled device to your TV. For
connection instructions, see "Connect an
MHL-enabled device" on page 22. A message
tells you the device is connected.
2 Press ENTER to access your MHL-enabled
device. Your device's menu opens.
Note
Your device's menu will vary depending on
the device and the Apps you have loaded
on the device.
3 Use
and ENTER to navigate on your
device.
Note
The buttons you use to navigate on your
device may vary depending on the device.
Advertisement
Table of Contents
