Selecting The Video Input Source; Selecting A Channel; Adjusting The Volume; Viewing Channel Information - Insignia NS-40E560A11 User Manual

3 Press POWER again to turn off your TV. Your TV
enters Standby mode and the power indicator
LED turns red.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press INPUT. The Source
List opens.
So u r c e l i s t
Component
HDMI 1
HDMI 2
HDMI 3
HDMI 4
2 Press or to highlight a video input source,
then press ENTER.

Selecting a channel

To select a channel:
• Press CH + or CH – to go to the next or previous
channel on the memorized channel list.
• Press the number buttons to enter the channel
number you want, then wait for the channel to
change or press ENTER to immediately change
the channel.
• To select a digital sub-channel, press the number
buttons to select the main digital channel, press
(dot), then press the number button for the
sub-channel. Wait for the channel to change, or
press ENTER to immediately change the channel.
For example, to tune to channel 5.1, press 5,
(dot), then 1.
• Press RECALL to go to the previous channel.

Adjusting the volume

To adjust the volume:
• Press VOL + or VOL – to increase or decrease the
volume.
• Press MUTE to turn off the sound. Press MUTE
again to turn the sound back on.
14
TV
AV
VGA
www.insigniaproducts.com
NS-40E560A11/NS-46E560A11- Insignia 40"/46" LED-LCD TV, 1080p

Viewing channel information

To view channel information:
• Press INFO to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal
type, audio information, resolution, CC mode,
current time, and current program start and
end times.
• Analog channel information—Displays
channel number, channel label (if preset),
signal type, audio information, and resolution.

Using the electronic program guide (EPG)

To use the electronic program guide (EPG):
1 When watching digital programs, select the
channel you want to watch.
2 Press GUIDE. The EPG opens and shows detailed
information about the current program. The
amount and type of information depends on
the information provided by the broadcaster.
3 Press
programs on the selected channel.
4 Press GUIDE one or more times to close the EPG.
You can also wait 30 seconds for the EPG to
close automatically.

On-screen menu overview

Notes
•
•
•
Picture menu
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
Reset Picture Settings
Move
Adjust Settings to affect picture quality.
or to display information about future
Depending on the signal source selected, you
may see different options on your screen.
Menu items that are not selectable are grayed
out.
The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
TM
Picture Audio Channels Settings
Custom
Select
Previous
MENU
ENTER
40
52
50
0
5
Exit
EXIT