Connect An Mhl-Enabled Device - Insignia NS-24D510NA15 User Manual

Connect an MHL-enabled device

You can connect an MHL-enabled device, such as a cell phone, and view your device's screen on your TV.
Note
You must use the purple HDMI 2 (MHL) jack to connect an MHL-enabled
device.
On your TV
MHL-enabled
HDMI cable
connector
HDMI 2/MHL
jack
1 Connect the small connector on an MHL cable (not provided) to the micro USB port on the MHL-enabled device.
2 Connect the other end of the cable to the HDMI 2 (MHL) jack on the side of your TV.
3 Turn on the MHL-enabled device.
4 If your TV is turned on, press ENTER when a message appears. Your MHL-enabled device's menu opens.
OR
If your TV is turned off, turn on your TV. Press
Notes
You can also switch to MHL mode by:
• Pressing INPUT and selecting HDMI2 (MHL/ACC)
• Pressing MENU and selecting MHL/ACC
For instructions on using your MHL-enabled device, see
MHL-enabled
device
MHL cable
device" on page 43.
www.insigniaproducts.com
NS-24D510NA15 Insignia 24" LED TV
Side of TV
(home). Your MHL-enabled device's menu opens.
"Use an
23