Device Settings And Operation (Front Panel); Device Setting And Operation (Front Panel) - Fujitsu IP-9610 Hardware User's Manual

3.3
3.3
The IP-9610 has six control keys: [ ], [ ], [ ], [ ], [Enter], [Cancel], [F1], [F2], [F3] and [F4].
Use these keys for making settings.
The VFD panel displays of 4 lines, 24 characters per line.
See Software User's Guide for the procedure of the software installation and the each setting.
■Function description of each key
Functions of [ ] and [ ] keys
- Each key changes the menu items or setting items displayed on the VFD panel.
- The displayed item changes each time either key is pressed. [ ] and [ ] change items in
the opposite direction.
Functions of [ ] and [ ] keys
- Each key moves the cursor displayed on the VFD panel to the left or right.
- The cursor moves one column each time either key is pressed.
[Enter] key
- Pressing the [Enter] key while the maintenance initial page is displayed proceeds to the
maintenance menu page.
- Pressing the [Enter] key on the maintenance menu page allows you to make settings for status
display and shutdown.
[Cancel] key
- Pressing the [Cancel] key while the maintenance menu page is displayed proceeds to the
maintenance initial page. Pressing the [Cancel] key on the setting item selection page returns to
the page displayed immediately before you pressed the [Enter] key.
[F1]～[F4] key
- Short cut key to any menu location. By pressing the [F1]～[F4] key, menu location can be changed
to registered location. By pressing the [F1]～[F4] key for a while under the menu location that
customer want to register, that menu location will be registered.
Other
- If you do not make any key input for 60 seconds on any page, the current page proceeds to the
maintenance initial page.
Device Settings and Operation
(Front Panel)
Front Control Panel
33
Chapter 3 Operation instructions
IP-9610