Sharp AL-1552 Operation Manual page 68

Digital multifunctional system
Hide thumbs Also See for AL-1552:
Table of Contents

Advertisement

When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order, the
covers may be damaged.
D: Misfeed in the lower paper feed area (AL-1555)
1
Open the lower side cover
(under the manual tray) and
remove the misfed paper. If
paper is not seen from the
area of the lower side cover,
pull out the lower paper tray
and remove the misfed
paper. Then close the lower
paper tray.
2
Close the lower side cover.
3
Close the side cover by pressing the round projections near
the side cover open button. The misfeed (
out and the start (
E: Misfeed in the SPF (AL-1553), RSPF (AL1555)
An original misfeed may occur at one of three locations: if the misfed original is seen
from the original feeder tray, (A) in the original feeder tray; if the misfed original is not
seen from the original feeder tray, (B) in the exit area or (C) under the feeding roller.
Remove the misfed original following the instructions for each location.
(A) Open the feeding roller cover and pull the original gently to the left and out
from the original feeder tray. Close the feeding roller cover. Open and close
the SPF/RSPF to clear the SPF/RSPF misfeed (
original cannot be easily removed, proceed to (C).
66
blinks and the misfed
) indicator will light up.
) indicator will go
) indicator. If the misfed
Feeding roller cover

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Al-1553Al-1555

Table of Contents