Turning Off The Power Via Windows Nt - Fujitsu 5000 Series User Manual

2
Click [Shut Down].
The following dialog box appears.
For Windows 98
3
Check that "Shut down the computer?" has been selected and then click [OK].
The power is turned off automatically.
Point
If "APM Power Controls" on the BIOS setup menu is set to "Disabled," the message "The computer
is ready for shut down" is displayed. Since power is not automatically turned off, press the Power
button to turn off the power. (
Point
BIOS Setup
A guide to your Deskpower 5000 BIOS is available online. Please visit our technical support section
at www.fujitsu-pc-asia.com. Once there, click on the desktop series from the pull down menu and
select the appropriate desktop model.

Turning off the power via Windows NT

1
Click [Start].
The "Start" menu appears.
2
Click [Shut Down].
The following dialog box appears.
3
Check that "Shut down the computer?" has been selected and then click [Yes].
Turned off the system unit.
See Section 5, "Power Menu," "BIOS Setup.")
11