Table of Contents
Advertisement
Important notes
Energy saving, disposal and recycling
Disposal
Energysaving
Recycling
Information on these subjects can be found in the manual "Environmental and Energy Information"
or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").
Important notes for operating your device via USB
Power Delivery (USB-PD)
Your device supports USB-PD, a function defined by the USB Implementers Forum
(USB-IF) (current specification): USB-PD version 2.0).
You can use USB-PD to power the device via a USB-C cable. The Fujitsu P24-9
TE monitor, for example, acts as a power adapter for this purpose. No further
connection cables to the system are required.
Make sure that you always use the USB-C to USB-C cable included with the screen when operating
via USB-PD. Otherwise, security problems may occur. To ensure safety and compatibility, use
only the supplied USB-C cable or an equivalent certified USB-C cable. In an extreme situation
(CPU fully loaded and many external USB devices with high power consumption simultaneously
connected to your ESPRIMO), the internal CPU frequency can be lowered to avoid power overload.
Mouse, keyboard, headphones and similar devices have low power consumption and do not cause
overload. Once the overload is over, the CPU frequency returns to its normal value. In order to
avoid a performance limitation, the device causing the overload must be stopped, or the number of
USB devices with high power consumption connected to the ESPRIMO must be reduced.
Fujitsu
9
Advertisement
Table of Contents
