Volume Level - Marantz SR5008 Owner's Manual

Contents
General
Make various other settings.
Language
Set the language for display the menu on the TV screen.
English (Default) / Deutsch / Français / Italiano / Español / Nederlands
/ Svenska / / Polski
%
• "Language" can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1. Press and hold the main unit's ZONE2 SOURCE and STATUS for at least 3
seconds.
"Video Format <PAL>" appears on the display.
2. Press the main unit's DISPLAY.
"GUI Language ENGLISH" appears on the display.
3. Use the main unit's PRESET CH +, – and set the language.
4. Press the main unit's STATUS to complete the setting.
Front panel Display
Connections Playback
Rear panel
Settings
ZONE2 Setup
Set the audio to play back with multi-zone (ZONE2).
%
• Values set for "Volume Limit" and "Power On Volume" are displayed according to
the setting specified for the volume "Scale" (vpage 141).
2 Lch Level
Adjust the left channel output level.
–12dB – +12dB (Default : 0dB)
2 Rch Level
Adjust the right channel output level.
–12dB – +12dB (Default : 0dB)

2 Volume Level

Set the volume output level.
Variable (Default) : Volume can be adjusted.
1 – 98 (–79dB – 18dB) : Volume is fixed at the desired level. The
174
Remote
Tips Appendix
volume cannot be adjusting using the remote
control unit.
Index