Marantz SR5008 Owner's Manual page 18

Contents Connections
Q6 Q5 Q4 Q3
Front panel Display
Playback
Q3
REMOTE CONTROL connectors
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room (vpage 47).
Q4 M-XPort connector
Used to connect to a wireless receiver (RX101, sold separately)
(vpage 46).
Q5 DC OUT jack
Used to connect devices equipped with the trigger function
(vpage 48).
Q6 RS-232C connector
The RS-232C serial port is provided to allow compatibility with an
external home automation controller. Consult the owner's manual
of the home automation controller for more information about serial
control of this unit. The serial port allows two-way control and status
via an external home automation controller.
NOTE
• Do not touch the inner pins of the connectors on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
18
Rear panel
Tips
Settings
Remote Index
Appendix