Aligning the Text
You can align the text to print centered, left justified, or right justified on the label. The
default alignment is centered.
To change the alignment
1.
Press
.
2.
Select
Alignment and press
3.
Select right, left, or centered alignment and press
Creating Fixed-Length Labels
Normally, the length of the label is determined by the length of the text. However, you can
choose to set the length of the label for a specific application. When you choose a fixed
label length, the label text is automatically resized to fit the label. If the text cannot be
adjusted to fit within the fixed label length, a message is displayed showing the smallest
possible label length for this text. You can choose a fixed length label up to 400 mm long.
To make your label a fixed length
1.
Press the
Label Length and press
2.
Select
3.
Select
Fixed and press
4.
Select the length for your label and press
Using Mirror Text
The mirror format allows you to print text which reads from right to left, as you would see
it in a mirror.
To turn on mirror text
1.
Press the
2.
Select
Mirror and press
3.
Select
On and press
}
.
key.
}
}
.
key.
}
.
}
.
}
.
.
}
.
31