Inserting Saved Text; Caring For Your Label Maker - Dymo LabelManager 210D User Manual

Inserting Saved Text

You can insert the text of a saved label into the current label. Only the saved text is inserted,
not the formatting.
To insert saved text
1. Position the cursor at the location in the current label where you want to insert the text.
2. Press .
The first memory location is displayed.
3. Use the arrow keys to select the text you want to insert.
}
4. Press . The text is inserted in the current label.

Caring for Your Label Maker

Your label maker is designed to give you long and
trouble-free service, while requiring very little
maintenance. Clean your label maker from time to
time to keep it working properly. Clean the cutter
blade each time you replace the tape cassette.
To clean the cutter blade
1. Remove the tape cassette.
2. Press and hold down the cutter button to expose
the cutter blade. See Figure 6.
3. Use a cotton ball and alcohol to clean both sides of the blade.
To clean the print head
1. Remove the tape cassette.
2. Remove the cleaning tool from inside the label compartment cover.
3. Gently wipe the padded side of the tool across the print head. See Figure 6.
Print head
Cutter
button
Figure 6
35