You can choose to print your labels in many different sizes and styles. The labelmaker uses DYMO D1 label cassettes in widths of 1/4” (6 mm), 3/8” (9 mm), and 1/2” (12 mm). Label cassettes are also available in a wide range Figure 2 of colors.
To insert the label cassette 1. Press and release the label cassette cover to CLICK! open the label compartment. See Figure 3. Remove cardboard insert Figure 5 5. Press firmly until cassette clicks into place. 6. Close the label cassette cover and press Figure 3 turn on the power.
Getting to Know the Labelmaker Box/ Align/ Format Font Style Underline Justify Breaks Scroll Become familiar with the location of the feature and function keys on your labelmaker. Refer to Figure 1 Fixed length on the inside front cover. The following sections # of copies describe each feature in detail.
Navigation Keys When you select a font, that font applies to all characters on a label. If you want to use more than You can review and edit your label using the left one font, you must insert format breaks. See Using and right arrow keys on the Navigation key.
Using Symbols and Adding International Characters Special Characters The labelmaker supports the extended Latin character set using RACE technology. Similar to Symbols and other special characters can be using a mobile phone keypad, if you type a letter added to your labels. multiple times within a very short time, you will scroll through variations on that letter.
Serializing Your Labels Previewing Your Label You can print a series of labels with the last number You can preview the text or format of your label incremented by one number. The number of labels prior to printing. A two-line label is previewed as a serialized depends upon the number of copies you single-line label.
Using Labelmaker Memory location that is filled, the previously stored format will be overwritten. The labelmaker has a powerful memory feature 4. Select a field and press . The word Name? that stores text and formatting as follows: appears in the field. •...
• Adjust the fixed-length label setting appropriately, or • Select a narrower font size. Contacting Customer Support If you still need assistance, contact DYMO Customer Support. Refer to at the back of this User Guide to locate the contact number for your country.
We also welcome your suggestions about additional topics you would like to see covered in the documentation. Send email messages to: documentation@dymo.com Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please contact Customer Support.
Contacting Customer Support The following table provides a list of telephone numbers to reach DYMO Sales and Support departments. You can also reach DYMO at www.dymo.com. Country Telephone Australia 1800/ 633 868 1800/ 817 558 Austria 01/ 599 14 20 12...
Page 14
No part of this document may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of DYMO Corporation. ExecuLabel is a trademark of DYMO Corporation. DYMO is a registered trademark of Esselte Corporation. All other trademarks are the property of their respective holders.