Samsung SSC-12P Installation Manual page 27

e 5-pin Terminal jack
A terminal block for supplying backup power for the PIR sensor operation during power
outages and for transmitting the relay signals to external devices during the PIR sensor
operation.
5 4 3 2 1
Function Switch
f
A function switch for the PIR sensor operation.
ON
OFF
S1 S2 S3 S4
PIR Sensor
g
A thermal heat sensor that detects infrared radiation projected by warm objects.
Microphone
h
Capable of picking up all sound in the vicinity of the camera location and transmitting to the
monitor.
Electronic Relay
i
Output power is 350V/130mA.
PIN SPEC
1 Power Input DC 12 Volts
2 (Back Up) Ground
3 Not Used
4 Relay Output COM
5 (350v 130mA) N.C
PIN SPEC
Sensor Sensitivity
1
On, On : Low
On, Off : Normal
2 Off, On : Normal
Off, Off : High
3 Alarm Led On/Off (Sensor On)
4 Sensor On/Off
26