Samsung SSC-12P Installation Manual page 19

Remove the screw (BH M2.6) at the bottom of the main unit by turning it
G
counterclockwise, and then lift the assy-case front as you push it
upward to detach it from the case-rear.
(❊Do not apply excessive force, as doing so may damage the inside
assembly.❊ )
Assy-case front
Screw (BH M2.6)
Connecting Cables
G
1) Connecting the cables to the case-rear.
Connect the RJ-11 cable to the RJ-11 connector on the case-rear and
connect the camera cable to the cable terminal on the on the case-rear.
CASE-REAR
18