Samsung SSC-12P Installation Manual page 21

Adjust the direction of the lens.
G
1) Use the cross (+) screw driver to turn the screw (indicated by the arrow
in the illustration) counterclockwise slightly.The lens body will move.
2) Tilt the lens body down about 10° from the horizontal, and then turn
the screw clockwise to fasten it.
Assemble the assy-case front onto the caserear as shown in the
G
illustration. Fasten the assy-case front to the case-rear with thescrew
(BH M2.6) you removed earlier.
CASE-REAR
Screw (BH M2.6)
ASSY-CASE
FRONT
20
Screw