Samsung SSC-12P Installation Manual page 17

Adjust the direction of the lens.
G
1) Use the cross (+) screw driver to turn the screw (indicated by the arrow in the
illustration) counterclockwise slightly. The lens body will move.
2) Tilt the lens body down about 10° from the horizontal, and then turn the screw
clockwise to fasten it.
Assemble the assy-case front onto the case-rear as shown in the illustration.
G
Fasten the assy-case front to the case-rear with the screw (BH M2.6) you removed
earlier.
CASE-REAR
BH M2. 6
SCREW
ASSY-CASE FRONT
16