Deleting Host Groups; Editing Ldev Groups; Deleting Volumes From Ldev Groups - HP STORAGEWORKS XP24000 User Manual

Deleting Host Groups

To delete a host group, take the following steps.
To delete a host group:
1. Ensure that you are in Modify mode.
2. In the Volume Security window
3. Do either of the following:
Right-click a host group in the tree view.
Right-click Host Group in the tree view and then select Add/Change from the pop-up menu.
Next, in the Add/Change Host Group dialog box
in the Host Group List table and right-click the selection.
4. Select Delete from the pop-up menu.
A message appears and asks if you want to delete the specified host group(s).
5. Click Yes to close the message. If the Add/Change Host Group dialog box
displayed, click OK to close the dialog box.
CAUTION:
Here, the change in the window has not been applied to the storage system.
6. Click Apply in the Volume Security window
A message appears and asks if you want to apply the change to the storage system.
7. Click Yes.
The change is applied to the storage system.

Editing LDEV Groups

This section explains the following operations, which allow you to edit your host groups:
Deleting volumes from an LDEV group (see
Renaming an LDEV group (see
Deleting an LDEV group (see

Deleting Volumes from LDEV Groups

To delete volumes from an LDEV group, take the following steps:
To delete volumes from an LDEV group:
1. Ensure that you are in Modify mode.
2. In the Volume Security window
3. Right-click an LDEV group.
A pop-up menu appears.
4. Select Specify and then LDEV from the pop-up menu.
The Select LDEV dialog box
5. Use the CU drop-down list to specify a CU image.
(Figure 4), double-click an LDKC number.
(Figure 4).
"Deleting Volumes from LDEV
"Renaming LDEV Groups" on page 66).
"Deleting LDEV Groups" on page 67)
(Figure 4), double-click an LDKC number.
(Figure 12) appears.
XP24000/XP20000 Volume Security User's Guide
(Figure 9), select one or more host groups
(Figure
Groups" on page 65)
9) still remains
65