Deleting Ports From Host Groups - HP STORAGEWORKS XP24000 User Manual

3. Right-click a host group.
A pop-up menu appears.
4. Select Specify and then Host from the pop-up menu.
The Add/Change Host dialog box
and
5.
Select and then right click one or more hosts (indicated by
6. Select Registration and then Unregister Host from Host Group from the pop-up menu.
The specified hosts are displayed by blue. Also, icons disappear or change to
The icons
7. Click OK in the Add/Change Host dialog box.
CAUTION:
Here, the settings in the window have not been applied to the storage system.
8. Click Apply in the Volume Security window
A message appears and asks if you want to apply the settings to the storage system.
9. Click Yes.
The settings are applied to the storage system.

Deleting Ports from Host Groups

To delete ports from host groups, you must ensure that Volume Security Port Option is already installed.
To delete ports from a host group, take the following steps:
To delete ports from a host group:
1. Ensure that you are in Modify mode.
2. In the Volume Security window
3. Right-click a host group.
A pop-up menu appears.
4. Select Specify and then Port from the pop-up menu.
The Select Port dialog box
5. In the Port list in the Registered port box, select one or more ports that you want to delete. Next,
click the Unregist button.
The specified ports are displayed in blue in the Port list in the Unregistered port box.
NOTE:
To select all ports in the Port list in the Registered port box, click the Select All button.
6. Click OK in the Select Port dialog box.
The Select Port dialog box closes and you are returned to the Volume Security window.
(Figure
indicate hosts registered in the specified host group.
and indicate that the host is registered in another host group.
(Figure
(Figure 13) appears.
11) appears and displays a list of hosts. The icons
(Figure 4).
4), double-click an LDKC number.
XP24000/XP20000 Volume Security User's Guide
or ) that you want to delete.
or .
63