Managing the HP NetStorage 6000 Using Telnet
Modifying a Host
Telnet allows you to modify host information.
Note
If the host already exists, the host information displays.
Adding a Host
1. From the main menu, select F. Hosts.
2. Type the new host name, then press Enter.
The system will make sure the host name does not already exists. If not, the following screen displays:
3. Press Enter to add the host.
4. Enter the new host IP address.
5. Select 7. Save Changes.
Deleting a Host
1. From the main menu, select F. Hosts.
2. Type the host name you are deleting and press Enter.
3. Select 8. Delete.
Editing a Host
1. From the main menu, select F. Hosts.
2. Type the host name you are editing and press Enter.
3. Select 1. Edit.
4. Enter the new Host Name and/or Internet IP Address.
5. Select 7. Save changes.
26