Setting The Time - Cisco AVS 3120 Hardware Installation Manual

Setting the Time

We also recommend that you change the account password from its default. To do this, use the
Step 8
edit admin command:
velocity>edit admin current-name fgn new-password password
where:
password
For more details about using the CLI and the Management Console, refer to the Cisco Application
Velocity System User Guide.
Setting the Time
Many features of AVS depend on having the clocks synchronized among all of the deployed AVS devices
and the origin servers. It is important to synchronize all clocks whenever a new device is deployed.
Here is a summary of the ways to set the clock on an AVS device:
•
•
We recommend that you use an NTP time synchronization source.
Note
For information on using the CLI to configure the AVS 3120, refer to the Cisco Application Velocity
System User Guide. For an example of using the set ntp and set date commands, refer to the previous
section,
Cisco AVS 3120 Application Velocity System Hardware Installation Guide
3-12
is the new password for the
Use the set date command to set the date, time, and local time zone.
Use the set ntp command to configure the AVS device to get its time from an NTP time
synchronization source. The NTP source should be the same for all deployed AVS devices and origin
servers.
Configuring Network
account.
fgn
Settings.
Chapter 3 Installing the AVS 3120
OL-11805-01