Marantz SR6008 Owner's Manual page 64

Contents
Listening to FM broadcasts
1
Press TUNER to switch the input source to "TUNER".
TUNER
CH 1
Tune
TUNE+/-
GDisplay of this unitH
2
Press TUNE + or TUNE – to select the station you want
to hear.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
Front panel Display
Connections Playback
GTV ScreenH
STEREO AUTO
Now Playing
FM 87.50MHz
Preset Option
CH / OPTION
Rear panel
Settings
%
• The modes for receiving FM broadcasts consists of "Auto" mode that automatically
searches available broadcast stations and "Manual" mode that lets you tune in
using buttons to change the frequency. The default setting is "Auto". You can also
use "Direct Tune" to tune in by entering the frequency directly.
In "Auto" mode, you cannot tune in to radio stations if the reception is not good. If
this is the case, then use the "Manual" mode or "Direct Tune" to tune in.
Operation buttons
TUNE +, –
CH/PAGE df
FAVORITE STATION
1 – 3
64
Remote
Tips Appendix
Function
Tuning (up/down)
Preset channel selection
Call up FAVORITE STATION
(Press and hold)
Registering to FAVORITE STATION
Index