Rinnai Continuous Flow Water Heaters Operation Manual page 19

Bathroom Deluxe controller
Operating the shower saver and bath fill
• Temperature
Initial settings
• Volume
With the system on, select a Deluxe Bathroom Controller. If it does not
Setting
have priority, press the 'Transfer' button once and the 'Transfer' button will
shower/bath
illuminate.
temperature
and volume
Press 'Shower Saver/Bath Fill' button once. The button will illuminate and
voice prompt and tone will sound. Ensure you have the voice and sound
turned on.
To select the desired delivery temperature use the 'Temperature' up and
down buttons. The selected temperature will be displayed on the digital
monitor and will remain as the default 'Shower Saver/Bath Fill' temperature
until it is changed or if the mains power is turned off for an extended
period.
When filling a bath for the first time, it is recommended that a low bath fill
volume such as 60 litres or lower be used. During subsequent bath fills the
volume can then be adjusted to suit your known bath volume or desired fill
level.
A volume counter (to highlight remaining volume of water to be delivered)
displays on the controller below the temperature display (replaces the clock
during 'Shower Saver/Bath Fill' operation).
When filling Be careful not to overfill the bath, an average bath volume is 160 litres. It is
the bath or if recommended that when filling a bath for the first time you should:
the water has
been turned off • remain by the bath during the filling process
• use a low bath fill volume such as 60 litres or less
If the 'Shower Saver/Bathfill' is interrupted (water is turned off) for any
reason and there is more than half the volume of the set amount of water
delivered, the 'Shower Saver/Bath Fill' will reset itself back to normal
operation when turned on again.
For example:
Rinnai New Zealand Ltd
= 40 °C
= 100 litres (range 30-400 litres)
Set Delivered Volume (bathfill
Volume interrupted - tap closed)
160 L 50 L
160 L 110 L
Delivered Volume (bathfill restarted
- tap turned on again)
110 L
Resets back to normal operation
Continuous Flow Water Heater Operation Manual
19
03-11