Dmi Configuration; Memory Configuration - Asus Z97I-PLUS Manual

CPU Graphics Memory [Auto]
Allows you to set the system memory size allocated to DVMT 5.0 used by the CPU
graphics. Configuration options: [Auto] [32M] [64M] [96M] [128M] ~ [448M] [480M]
[512M]
Render Standby [Auto]
This item allows you to enable Intel
power use when the system is idle. Configuration options: [Auto] [Disabled] [Enabled]
CPU Graphics Multi-Monitor [Disabled]
This item allows you to empower both integrated and discrete graphics devices for the
multi-monitor output. The CPU graphics shared system memory size is fixed at 64 MB.
Configuration options: [Disabled] [Enabled]

DMI Configuration

This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed.
DMI Gen 2 [Enabled]
Set this item to [Enabled] to run DMI at PCI-E 2.0 speed. Configuration options:
[Enabled] [Disabled]
NB PCI-E Configuration
This item allows you to configure the NB PCI Express settings.
PCIEx16_1 Link Speed [Auto]
This item allows you to configure the PCIEx16 speed for slot 1. Configuration options:
[Auto] [Gen1] [Gen2] [Gen3]

Memory Configuration

This item allows you to configure the memory configuration parameters.
Memory Scrambler [Enabled]
Set this item to [Enabled] to support high frequency DRAMs for a better stability.
Configuration options: [Enabled] [Disabled]
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64-bit operating
systems. Configuration options: [Enabled] [Disabled]
ASUS Z97I-PLUS
Graphics Render Standby support to reduce iGPU
®
3-37