Onboard Leds - Asus Z97I-PLUS Manual

1.2.8

Onboard LEDs

1. Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
Z97I-PLUS Standby power LED
2. DRAM LED
DRAM LED checks the DRAM in sequence during motherboard booting process. If an
error is found , the LED next to the error device will continue lighting until the problem
is solved. This user-friendly design provides an intuitional way to locate the root
problem within a second.
Z97I-PLUS DRAM LED
3. Bluetooth LED and WiFi module LED
Z97I-PLUS Bluetooth LED
* Bluetooth and Wi-Fi module LED indications
Wi-Fi LED
Status
Off
Green
* Wi-Fi 802.11 a/b/g/n/ac, Bluetooth v4.0
** The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such mark by ASUSTeK
Computer Inc. is under license. Other trademarks and trade names are those of their respective owners.
1-14
SB_PWR
DRAM_LED
WIFI_LED
BT_LED
Bluetooth LED
Description Status
No link Off
Linked Blue
Blinking
Description
No link
Linked
Data activity
Chapter 1: Product introduction