9. Remove and discard the four indicated
9
screws (C).
C
C
10. IMPORTANT: To avoid damaging the
10
Crossbar (93), do not use power tools and do
9
not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten four
87
93
#10 x 3/4" Screws (9) about halfway into the
Handrails (87, 88). Next, slide the Crossbar as
9
far forward as possible. Then, tighten the four
Screws.
88
11