11. Firmly tighten the four 3/8" x 2 3/4" Screws
(7) first, and then tighten the four 3/8" x 1 1/4"
Screws (8) (only one side is shown).
Press the Left and Right Base Covers (92, 93)
onto the Base (97) until they snap into place.
12. IMPORTANT: See page 17 and plug in the
power cord. Next, see page 19 and turn on
the power.
Then, press the 0 percent 1 Step Incline
button.
When the frame stops moving, remove the
key from the console and unplug the power
cord.
13. Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (53) to
the Base (97) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (11).
Attach the upper end of the Storage Latch (53)
to the Frame (56) with a 3/8" x 1 3/4" Bolt (6)
and a 3/8" Nut (11).
11
92
7
8
97
12
13
56
11
Latch
Knob
Large
Barrel
97
14
IMPORTANT:
Make sure to follow all
instructions in this step.
6
53
11
3
93