NordicTrack NTL19011.1 User Manual page 13

9. Insert the wires into the Left Upright (89) as you
set the handrail assembly on the Left and Right
Uprights (89, 90). Be careful not to pinch the
wires.
Attach the handrail assembly with the four 3/8" x
2" Bolts (3) that you removed in step 6 and four
3/8" Star Washers (12). Start all four Bolts, and
then tighten them.
10. With the help of a second person, hold the con-
sole assembly near the handrail assembly. Be
careful not to pull on the wires during
assembly.
Connect the Handrail Wire (86) and then the
pulse wire to the wires from the console. The
connectors should slide together easily and
snap into place. If they do not, turn one connec-
tor and try again. IF YOU DO NOT CONNECT
THE CONNECTORS PROPERLY, THE CON-
SOLE MAY BECOME DAMAGED WHEN YOU
TURN ON THE POWER.
Set the metal bracket on the console assembly
onto the metal frame inside the handrail assem-
bly. Be careful not to pinch the wires.
Attach the console assembly with two 3/8" x
2 1/2" Screws (4) and two 3/8" Star Washers
(12). Start both Screws, and then tighten
them.
9
Handrail
Assembly
12
3
90
10
Console
Assembly
Console
Wire
Pulse Wire
13
12
3
89
Metal
Bracket
Console
Handrail
12
12
Assembly
4
4
Wires
Wire
86