Table of Contents
Advertisement
www.nordictrack tness.com
Model No. NTL19011.1
USER’'S MANUAL
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go
to www.nordictrackservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for NordicTrack NTL19011.1
Summary of Contents for NordicTrack NTL19011.1
- Page 1 Model No. NTL19011.1 USER’’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.nordictrackservice.com/ registration. CUSTOMER CARE For service at any time, go to www.nordictrackservice.com.
-
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decals may not be shown at actual size. NORDICTRACK is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
17. To purchase a surge suppressor, see your local 4. The treadmill is intended for home use only. NORDICTRACK dealer, call the telephone Do not use the treadmill in any commercial, number on the front cover of this manual, or rental, or institutional setting. - Page 4 20. The heart rate monitor is not a medical 24. Do not change the incline of the treadmill by device. Various factors, including the user’’s placing objects under the treadmill. movement, may affect the accuracy of heart rate readings. The heart rate monitor is 25.
- Page 6 STANDARD SERVICE PLANS...
-
Page 7: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this NORDICTRACK ® ELITE 9500 PRO treadmill. The manual. To help us assist you, please note the product ELITE 9500 PRO treadmill offers an impressive selec- model number and serial number before contacting us. -
Page 8: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 9: Assembly
ASSEMBLY •• Assembly requires two persons. •• To identify small parts, see page 8. •• Place all parts in a cleared area and remove the •• Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex key materials until you ... - Page 10 3. Identify the Left Upright (89), which is marked ““Left.”” Have a second person hold the Left Upright near the Base (97). See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Wire Upright Wire (84).
- Page 11 5. Identify the Left and Right Base Covers (92, 93). Slide the Left Base Cover onto the Left Upright (89). Slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. 6. Set the handrail assembly face down on a soft surface to avoid scratching the handrail assembly.
- Page 12 7. Remove the four 3/8" x 1" Screws (2) from the Uprights (89, 90). Long Orient each Handrail Bracket (85) so that the long tab is in the position shown and the large holes are on top. Route the Upright Wire (84) Large through the center hole in a Handrail Bracket.
- Page 13 9. Insert the wires into the Left Upright (89) as you set the handrail assembly on the Left and Right Handrail Uprights (89, 90). Be careful not to pinch the Assembly wires. Wires Attach the handrail assembly with the four 3/8" x 2"...
- Page 14 11. Firmly tighten the four 3/8" x 2 3/4" Screws (7) first, and then tighten the four 3/8" x 1 1/4" Screws (8) (only one side is shown). Press the Left and Right Base Covers (92, 93) onto the Base (97) until they snap into place. 12.
- Page 15 14. Remove the packaging material from the bot- tom of the Frame (56). See the inset drawing. Make sure that the 1/2" Rear Leveling Foot Nuts (30) are threaded all of the way onto the Rear Leveling Feet (60). Then, turn the two Rear Leveling Feet all of the way into the Frame.
-
Page 16: The Chest Heart Rate Monitor
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR •• Do not expose the heart rate monitor to direct sun- light for extended periods of time; do not expose it to The heart rate temperatures above 122° F (50° C) or below 14° F monitor consists of (-10°... -
Page 17: Operation And Adjustment
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’’s... - Page 18 CONSOLE DIAGRAM FEATURES OF THE CONSOLE As you exercise, the console will display instant exer- cise feedback. You can also measure your heart rate The treadmill console offers an impressive array of using the handgrip heart rate monitor or the chest heart features designed to make your workouts more effec- rate monitor.
- Page 19 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to The console features a tablet with a full-color touch cold temperatures, allow it to warm to room tem- screen. The following information will help you become perature before you turn on the power.
- Page 20 HOW TO SET UP THE CONSOLE The console is now ready for you to begin working out. The following pages explain the various workouts and Before using the treadmill for the first time, set up the other features that the console offers. console.
-
Page 21: To Use The Manual Mode
HOW TO USE THE MANUAL MODE of the numbered 1 Step Incline/Decline buttons. Each time you press one of the buttons, the incline 1. Insert the key into the console. will gradually change until it reaches the selected incline setting. See HOW TO TURN ON THE POWER on page 19. - Page 22 If desired, adjust the 7. Turn on the fan if desired. Increase volume by pressing the volume increase and The fan features several speed settings and an decrease buttons on the auto mode. When the auto mode is selected, console. the speed of the fan will automatically increase and decrease as the speed of the walking belt Decrease...
-
Page 23: To Use An Onboard Workout
HOW TO USE AN ONBOARD WORKOUT If the speed and/or incline settings are too high or too low at any time during the workout, you can 1. Insert the key into the console. override the settings by pressing the Speed or Incline buttons. - Page 24 HOW TO USE A SET-A-GOAL WORKOUT The workout will function in the same way as the manual mode (see pages 20 and 21). 1. Insert the key into the console. The workout will continue until you reach the goal See HOW TO TURN ON THE POWER on that you set.
-
Page 25: To Use An Ifit Workout
HOW TO USE AN IFIT WORKOUT Before some workouts will download, you must add them to your schedule on iFit.com. Note: To use an iFit workout, you must have access to a wireless network (see HOW TO USE THE For more information about the iFit workouts, WIRELESS NETWORK MODE on page 28). -
Page 26: To Use The Equipment Settings Mode
HOW TO USE THE EQUIPMENT SETTINGS MODE 7. Turn on or turn off the display demo mode. 1. Select the settings main menu. The console features a display demo mode, designed to be used if the treadmill is displayed Insert the key into the console in a store. - Page 27 Touch the Passcode button. To enable a pass- Touch the Firmware Update button to check for code, touch the Enable checkbox. Then, enter a firmware updates using your wireless network. The 4-digit passcode of your choice. Touch Save to use update will begin automatically.
-
Page 28: Wireless Network Mode
HOW TO USE THE WIRELESS NETWORK MODE An information box will ask if you want to connect to the wireless network. Touch the Connect button The console features a wireless network mode that to connect to the network or touch the Cancel but- allows you to set up a wireless network connection. - Page 29 HOW TO USE THE STEREO SOUND SYSTEM Note: While you are using the browser, the speed, incline, fan, and volume buttons will still function, but To play music or audio books through the console’’s the workout buttons will not function. speakers, you must connect your MP3 player, CD player, or other personal audio player to the console.
-
Page 30: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero percent before you fold the treadmill. left. -
Page 31: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by follow- SYMPTOM: The console screen remains lit when ing the simple steps below. Find the symptom that you remove the key from the console applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. - Page 32 SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifications described on page 17. a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD.
-
Page 33: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 34: Part List
PART LIST Model No. NTL19011.1 R0113A Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Reed Switch Clamp 3/8" x 1" Screw Reed Switch 3/8" x 2" Bolt Storage Latch 3/8" x 2 1/2" Screw Drive Motor #8 x 3/4"... - Page 35 Key No. Qty. Description Key No. Qty. Description Wheel Pulse Ground Wire Handrail Top Front Cushion Console #8 x 2" Screw Cushion Adjust Assembly #1 3/8" Flat Washer Cushion Adjust Assembly #2 Bumper Hex Key #8 x 5/8" Screw Handrail Frame ––...
-
Page 36: Exploded Drawing
EXPLODED DRAWING A Model No. NTL19011.1 R0113A... - Page 37 EXPLODED DRAWING B Model No. NTL19011.1 R0113A...
- Page 38 EXPLODED DRAWING C Model No. NTL19011.1 R0113A 101 112...
- Page 39 EXPLODED DRAWING D Model No. NTL19011.1 R0113A...
-
Page 40: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...